Installation Steps - Vevor Rgxps90 Anleitung

Installation Steps

1. Place the deep parabolic
softbox fat on the ground and
open the Velcro on it.
4. After the support rod is
installed, glue the Velcro.
7. Attach the honeycomb grid to
the deep parabolic softbox.
2. Hold any support rod and pull
it to the right to hang it on the
hook.
5. Turn the deep parabolic
softbox upside down and
connect the inner diffusion cloth
to the softbox with Velcro.
8. Attach video lights to deep
parabolic softbox.(The product
does not include video lights and
is for installation display only.)
- 4 -
3. You can also follow the
numerical instructions on the
chuck to lift the two support rods
at the same time to improve
installation effciency.
6. Attach the outer diffusion cloth
to the deep parabolic softbox.
9. The installation is complete.