Rear Panel Functions; Dc Input +12V; Output; Footswitches - Tines & Reeds Rhodestar Le Bedienungsanleitung

REAR PANEL FUNCTIONS

DC INPUT +12V

Jack for connecting the external power supply.
+12V @ 500mA, center-positive

OUTPUT

RIGHT / LEFT:
Unbalanced quarter-inch (mono) jack audio outputs.

FOOTSWITCHES

TREMOLO:
Jack for connecting a footswitch to toggle the tremolo on or off.

EFFECTS LOOP

RIGHT:
Jack for connecting the effect return, right channel. If this jack is left unused, the signal for the
right channel will be taken from the left.
LEFT:
Jack for connecting the effect return, left channel. If this jack is left unused, the SEND jack
can be used as an additional output to tap into the audio signal before the tremolo, for example
to connect the dry signal to a guitar amplifier or audio interface.
SEND:
Jack for connecting additional effects. The SEND is positioned in the circuit after the equalizer
and before the tremolo. This allows for integrating external stereo effects as well.
14