Height Adjustment - Timago Tgr-R Kp 355L Benutzerhandbuch

Step 2. Assemble the backrest tubes into the moun�ng openings located under
the seat un�l the locking pins click.
Step 3. Place the assembled chair on the legs.
Step 4. Assemble the side handgrips into the moun�ng openings located on the
outer side of the seat.

HEIGHT ADJUSTMENT

• To adjust the height of the chair, press the metal pin, select appropriate
height of the leg, and then, lock the posi�on of the legs rela�ve to each
other with the locking pin. The legs are adjustable in 2.5 cm increments.
Note! The pins must be set on the same level in each leg.
4. Technical data
5. Notes
Timago Interna�onal Group does not bear responsibility of improper use of the
shower chair, failure to comply safety regula�ons and misuse.
6. Maintenance
• Clean the shower chair regularly using only water, sponge and mild
detergents for plas�c materials such as soap. Dry thoroughly.
• Do not use for cleaning: strong detergents, abrasive agents, bleach, petrol
or solvents (it may cause frame damage, visible defects and in consequence
- loss of warranty rights).
• Systema�cally check:
- �ghtening of the wing screws
- the condi�on of the locking pins
- the condi�on of the tubes (if cracks)
Width
Depth
Seat height
Overall height
Seat dimensions
Chair weight
Maximum capacity
48 cm
40 cm
37-49 cm
66-79 cm
40 x 33 cm
3,1 kg
136 kg
20