Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Disclaimer
Always be careful when operating your CNC machine. This machine is an electrical device with moving parts and
dangerous working areas.
● Genmitsu CNC Machines are for Indoor Use Only.
● You must be 18 years or older to operate this machine unless supervised by a knowledgeable adult familiar with the
machine.
● Always wear proper Personal Protection Equipment (Safety Glasses etc.).
● Always place the CNC Machine on a stable surface.
● The PROVerXL 4X4 CNC machine utilizes a high amp power supply. It is recommended that you do not plug the
CNC Router into an extension cord, or power strip, as it may damage the machine.
● Ensure the Emergency Stop Button is easily accessible at all times.
● Never disassemble the Power Supply or Electrical Components. This will VOID the warranty.
● DO NOT TOUCH the machine spindle, or place any body part near the working area when the machine is operating.
Serious injury may occur.
● DO NOT leave children unsupervised with the CNC Machine, even when it's not operating. Injury may occur.
● DO NOT leave the machine unattended while it's operating.
● Ensure your CNC Machine is operating in a well-ventilated area. Some Materials may discharge smoke or fumes
during operation.
03
Werbung
