VEVOR SH-001-BL Bedienungsanleitung Seite 6

7. Insert the small tom and large tom on to
the tom holders.
Tighten the wing nuts to secure the leds.
9. Assemble the pedal.
8. Insert the stand from the cymbal set into
the designated slot. Tighten the wing nuts to
secure the stand.Remove the wing nut,
washer, and top pad from the stand, place
the cymbal, then replace the top pad,
washer, and wingnut.
10. Put the pedal to the bottom of the bass
drum hoop and tighten the pedal screw.
- 5 -