15xWPC panels 60xscrews (130 x 10 x 900mm) 1x WPC Zauntor (ST3.5 x 18mm) 1 x WPC hanrail door 1x Türschloss 2x Scharnier 18x Schrauben 1 x door lock 18 x screws 2xaluminum crossbar...
Seite 3
Option 1: Einbetonieren Option 1: IM of pre-embedded alu. post Schritt 1 Step 1: Befestige das Scharnier (3) an der Kante der Aluminium-Quersange des Zauntors. Attach the hinge ③ to the edge of the alu. crossbar of the handrail door, and use Ø2.5mm Verwende einen Ø2,5 mm Bohrer, um das Loch in der Aluminium-Querstrebe ge- drill to predrill the hole on the alu.
Seite 4
Schritt 3 Step 3 : Step 3 : Install the handrail door on the post, and keep 1cm distance from the post and 2cm Montiere das Zauntor am Pfosten und halte einen Abstand von 1 cm vom Pfos- distance from the ground. Use Ø2.5mm drill to predrill on the post according to the holes ten und 2 cm vom Boden ein.
Seite 5
Option 2: Aufschrauben Schritt 1 Option 2: IM of alu. post with iron base Step 1 : Option 2: IM of alu. post with iron base Step 1 : Befestige das Scharnier (3) an der Kante der Aluminium-Querstange des Zauntors. Attach the hinge ③...
Seite 6
Step 3 : Schritt 3 101.5cm Stelle sicher, dass der Abstand zwischen den beiden Pfosten 101,5 cm beträgt und dass die Pfosten senkrecht zum Boden stehen. Ermittle dadurch die Position, an Make sure the distance between each two posts in 101.5cm and make sure the der der Pfostenanker platziert wird.
Seite 7
Schritt 5 Install the handrail door on the post, and keep 1cm distance from the post and 2cm distance from the ground. Use Ø2.5mm drill to predrill on the post according to the Montiere das Zauntor am Pfosten und halte einen Abstand von 1 cm vom Pfos- holes of hinge ③...
Seite 8
Step 6 : Schritt 6 Montiere das Schloss am Aluminium-Pfosten und am Zauntor (siehe Zeichnung Install the lock to the alu. post and handrail door.(as above drawing) oben).