Installation and operating
EN
instructions
Important notes
► All work must be carried out in a
de-energised state.
► Before installing flush piping system!
► The fitting must be checked and
maintained at regular intervals depending
on the water quality and in accordance with
the local conditions, and rules and
regulations applicable at the site.
Technical data
► Minimum flow pressure 1,20 bar
► Maximum operating pressure 4 bar
► Calculated flow rate 1,00 l/s
► Flushing flow 1,00 - 1,30 l/s
► Flush water volumes adjustable
► Voltage supply with
lithium battery CRP2 or
6 V DCSupply voltage 6,75 / 12 V DC or
A3000 open
► Power consumption 2 W
► Type of protection IP 59k (in assembled
condition)
DE
Montage- und Betriebsanleitung
Wichtige Hinweise
► Alle Arbeiten im spannungsfreien Zustand
durchführen
► Vor Installation Rohrleitungen spülen!
► In Abhängigkeit von der Wasserqualität,
den örtlichen Gegebenheiten und den vor
Ort geltenden Bestimmungen die Armatur
in regelmäßigen Abständen prüfen und
warten.
Technische Daten
► Mindestfließdruck 1,20 bar
► Maximaler Betriebsdruck 4 bar
► Berechnungsdurchfluss 1,00 l/s
► Spülstrom 1,00 - 1,30 l/s
► Spülwasservolumen 6-9 l einstellbar
► Spannungsversorgung:
Lithium Batterie CRP2 6 V DC oder
Anschlussspannung 6,75 / 12 V DC oder
A3000 open
► Leistungsaufnahme 2 W
► Schutzart IP 59k (im zusammengebauten
Zustand)
- 3 -