Konfiguration Des Zählermodus; Modus; Anzeigeeinstellungen - Banner Sd50 Produkthandbuch

SD50 mit Modbus®-Statusanzeige – Produkthandbuch
Konfiguration des Zählermodus
Use Counter Mode to count up to or down from a value based on an input signal.
Modbus
Register Description
Address
Count Increment
42000
Input
Count
42001
Decrement Input
42002 Reset Input

Modus

Modbus
Register Description
Address
42200 Mode

Anzeigeeinstellungen

Modbus
Register Description
Address
42300 Text Color
42301 Intensity
42302 Scroll Direction
42303 Scroll Speed
page 12 of 35
I/O Range Comments
0 = Off 0 = Off
1 = Count Up 1 = Count Up
(Pulse) (Pulse)
0 = Off 0 = Off
1 = Count Up 1 = Count Up
(Pulse) (Pulse)
0 = Off 0 = Off
1 = Reset Count 1 = Reset Count
I/O Range Comments
0 = Run Mode 0 = Run Mode
1 = Message 1 = Message
Mode Mode
2 = Level Mode 2 = Level Mode
3 = Timer Mode 3 = Timer Mode
4 = Counter 4 = Counter
Mode Mode
I/O Range Comments
0 = White 0 = White
1 = Black 1 = Black
0 = High 0 = High
1 = Medium 1 = Medium
2 = Low 2 = Low
3 = Off 3 = Off
4 = Custom 4 = Custom
0 = Towards 0 = Towards
Connector Connector
1 = Away From 1 = Away From
Connector Connector
0 = Slow 0 = Slow
1 = Standard 1 = Standard
2 = Fast 2 = Fast
3 = Custom 3 = Custom
Continued on page 13
© Banner Engineering Corp. Alle Rechte
vorbehalten. www.bannerengineering.com
Default Access
Off RW
Off RW
Off RW
Default Access
Run Mode RW
Default Access
White RW
High RW
Towards
RW
Connector
Standard RW
Holding Registers
Saved Notes
No Must be pulsed
No Must be pulsed
No
Saved Notes
Yes
Saved Notes
Yes
Yes
Yes
Yes
06-März-25