Werbung
EN
Fully charge the headset before using. Meanwhile,choose the cell phone that is
compatible with the headset or other Wireless connection devices to pair with the
headset.
Tip: Keep the headset away from your credit card or other magnetic storage
media;otherwise, the stored information may be lost due to demagnetization.
How to connect with the Wireless conection headset (Note: Use iPhone for example)
1. When the headset is powered off, press the "O" button for 3 second,
the "Power On, the Wireless connection device is ready to pair" sound is played. Then, the
headset is powered on and automatically enters the
pairing state with red & blue light flash alternately.
2. 0pen the Wireless connection software of your phone,searching the headset.
3. Find the bluetooth headset, pairing it to finish the connected.
Wireless connection Mode
Power-on pairing: When the headset is powered off, press the "O" button for 3 second, the
"Power On" sound is played. Then, the headset is powered on and automatically enters the
pairing state.
Connection: After the pairing is successful, the "Connected" sound is played
Releasing a Call: During a call, you can press the "O" button one time to release the call.
Rejecting a call: When there is an incoming call,you can press the "O" button for about one
second to reject the call.
Call answering: When a call is coming, click the "O" button to answer the call.
Last Number Redialing: Press the "O" button twice to redial the last number.
Music On/Pause: Press the "O" button once to play music,and press again to pause the
music.
Volume increase: The receiver volume increases by one level each time.The "Di Di" sound is
played when then maximum volume is reached.
Volume decrease: The receiver volume decreases by one level each time.
Previous song: If you press the volume- button for 1 second during music playing, the next
song is played.
Next song: If you press the volume+ button for 1 second during music playing, the previous
song is played.
ANC MODE
Press the "ANC" button,the" ANC On" sound is played.Then,the headset is automatically
enters to ANC mode.Press again the "ANC" button,the "ANC Off" sound is played.hen the
headset is automatically enters to normal Wireless connection mode.
AUX MODE
The headset can be used with an audio cable (supplied) that allows connection to a
desired device via the AUX port.The music starts automatically.
iOS battery indicator: After the headset is successfully connected to an
Apple device, the Apple device displays the current battery status of the Wireless connec-
tion headset.
Powering off ： In any state, press the "O" button for about 5 seconds until the indicator is
on in red for two seconds and then off, accompanied by the voice"Power Off" .
5
Werbung
