multi edge FLORA Montageanleitung Seite 9

3. Connection: Clips
To prevent the panels from disconnecting when moving the planter, you need to bend the clips.
Use the bending tool: slide it over the clip and bend it over the notch of the other panel as far as
possible.
4. Connecting the Remaining Panels
Repeat steps 1 to 3 until all the panels are connected and secured. Your planter should now
resemble one of the images above.
The planter is now ready to be placed and filled.
It is easier to assemble the planter upside down. During assembly, ensure that the open side
of the hooks is facing up. Once the planter is fully assembled, you can simply flip it over.