Technical Data - Profioffice Rollstream 320 Bedienungsanleitung

GB GB
Before using this product, please read the following
Before beginning work make sure that the rubber feet of the cutter are
assembled properly. In this case the cutter is secured on the cutting mat
and cannot slip during operation.
1. Push the knife head to the left or to the right till the limit stop.
2. Insert the paper into paper-pressing bar, place it according to the
markings and press the bar.
3. Slightly press the knife head down, and move it to the other side
of the device.
Maximum cutting capacity (paper 80 g / m
Maximum cutting length . . . . . . . . . . . . . . . . . . . . . . 320 mm
Cutting size . . . . . . . . . . . . . . . . . . . . . . . . . A4 / A5 / A6 / A7
Product size . . . . . . . . . . . . . . . . . . . . . . . . 445 х 190 х 70 (mm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 890 g
To operate the paper cutter safely, ensure hands,
hair and tie are kept clear of the knife head.
This cutter is ONLY suitable for cutting paper
P
aPer cutter
instructions carefully!
O
perating instructiOns
t
echnical data
W
arning
and PVC cover sheet.
) . . . . . . . . . . . 9 sheets
2
!