Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
Before first use
1. Remove the exterior and interior packing.
2. After unpacking the appliance, check for
completeness of delivery and for shipping
damage. If your delivery is damaged or
incomplete, please contact the After-sales Service.
3. Follow the supplied installation instructions to
install the appliance.
4. Remove all shelves and the drawer from the
appliance.
Product description
Product overview
7
6
Operation
Control panel
1
2
1
Power button
2
Internal light button
3
LCD display
4
Plus button
5
Minus button
6
Temperature unit button
Note: Do not use sharp objects to operate the control
panel. They can scratch or damage the control panel.
Switching on
When you connect the mains plug to a power socket,
the appliance switches on, emits a ring and starts
operating using the default or last used settings.
Notes: The optimum wine storage temperature was
already preset at the factory. After being switched
1
2
3
4
5 4
3
4
5
6
To download the full version visit www.ikea.com
5. Clean the interior surface with a soft, moistened
cloth.
6. Insert all shelves and the drawer back into the
appliance.
7. Wait at least 4 hours before switching on the
appliance.
1
Control panel
2
Handle (accessory)
3
Door gasket
4
Adjustable feet
5
Air vent
6
Wooden drawer
7
Wooden shelves
on, the appliance needs 2-3 hours to reach the preset
temperature for storing wine.
Display
•
The display lights up once the appliance switches
on. A few seconds later, the display starts showing
the set temperature for the storage compartment
in °C or °F.
•
During normal operation, the LCD display shows
the set temperature for the storage compartment.
•
In case of a known failure, the appliance shows
one of the following error codes on the LCD
display and beeps. To stop the beeping, tap any
button.
Error code
E1
Compartment temperature sensor
failure
E6
Internal communication failure
E9
High compartmenpt temperature
5
Fault
Werbung
