Sonoff RM433R2 Benutzerhandbuch Seite 6

SONOFF TECHNOLOGIES
Buttons Instructions
Example I: iFan04 Wi-Fi Fan & Light Controller
Buttons
Example 2: Dl Wi-Fi smart dimmer
Buttons
CO., LTD.
Functions
on/0ff (light)
Mute
Off (fan)
Low speed
Medium speed
High speed
Long press for 5s until the ceiling fan makes two sounds "Beep Beep" to
clear the code.
After clearing code is completed,
press any button within 5s after powering
makes a sound "Beep", and pairing is successful.
Long press for Ss until the fan makes two short and one long "Beep"
sound to enter the quick pairing
Then you can add the device on eWeLink APP. In quick pairing mode, you
can short press any button on the remote controller
Functions
on
Off
Short press for the low brightness,
Short press for the medium brightness, long press to turn down the brightness
Short press for the higher brightness,
Short press for the high brightness,
Long press for 5s until you hear "Beep
remote controller is cleared
After clearing code is completed,
button within Ss after
which indicates the remote
Long press for 5s until the connected
which indicates the device enters quick pairing
can add the light on eWeLink APP. In quick pairing
press any button on the remote controller
if you need to use the product,
on again until the ceiling fan
mode (Touch).
long press to turn down the brightness
long press to turn up the brightness
long press to turn up the brightness
Beep" and release,
successfully.
if you need to use, short press any
powering on again and you will hear" Beep",
controller is paired successfully.
light enters the breathing
to exit this mode.
5
English
please
to exit this mode.
then the
mode,
mode (Touch), then you
mode, you can short