TecTake 405928 Bedienungsanleitung Seite 2

Production Features
Color:
Strength:
Internal structure:
web spacing:
Light transmittance:
K-value / U-value:
Temperature resistance:
Fire performance
UV protection:
Snow load per square meter:
Recommended substructure:
Manufacturing process:
Cleaning:
Minimum cold bending radius:
Expansion at temp.:
Storage:
Contact person tectake Ltd
18 Soho Square London W1D 3QL United Kingdom
Telephone: +44 203 488 4565
www. tectake.co.uk
ORIGINAL INSTRUCTION MANUAL
RETAIN FOR FUTURE REFERENCE
EN
Aluminum/steel,glued laminated timber
Extrusion process :The Plastic is melted by an
extruder , then the extrudate is pressed shrough
nozzles , After the plastic comes out , it solidifies
With celan water or rinsing water ,
no abrasive agents , do not rub with a dry cloth .
Protect from moisture, direct sunlight and heat ,
best store in a dry room or cover with PE film,
Do not store directly on the ground
mail@tectake.co.uk
2
Transparent
405928 ：6mm ，405929 3.8mm
double T "工"
6mm
80%
~2.1
-20°c to +100°c
E
Min.one-sided
10kg/m2
Cold bending is not recommended
due to the internal structure
5mm/m
If the dimensions do not fit,
please cut the plates with a
cutter knife or utility knife.