PS FIT13 Kurzanleitung

FIT
CABINETLOCK WITH FREE | OCCUPIED LED SIGN
FIT- the electronic furniture lock with free/occupied LED sign, for use
with free cabinet selection.
The lock is mounted on the fixed cabinet/drawer and the tolerant
locking part on the freely movable door.
The lock is operated with RFID cards, Bluetooth or for system
developers via external relays. The range of the RFID cards is 22 mm
- for thicker doors it is possible to extend the antenna for further 10
mm, which then have to be milled into the door.
This lock was mainly developed for use in fitness studios.
The lock is operated with a 13.56 MHz (Mifare) Rfid card.
LED Indicator:
When closing, the cabinet door is pressed shut and the card is presented until the light turns red. To open, the card is presented
again, thus the LED turns green, which means that the cabinet is opened again.
Power consumption:
With a 12V power supply, the FIT lock is free of usage of
batteries. The power consumption is very low at 50 mA, 0.6
watts are required. Up to 20 locks can be supplied per power
supply. Every lock has a 1.8 m long cable, which can be
extended with one or more FIT extension cables , a cable is 2m
long. Each six cables are connected to a FIT extension 6m and
continued. The cable can be directly connected with the power
supply or the next FIT extension.
Delivery:
• Latch75
• Adjustable antenna
• 1,8 m cable
Accesories:
• FIT extension cable 2 m
• FIT extension—for 6 plugs
• 12 V Power Supply—for 6 plugs
• Tip-On/ Push to Open
• power supply
Copyright by:
PS GmbH Melisau 1255 6863 Egg
PS GmbH Tel.: 0043 699 13335155
Melisau 1255 Email: info@pslocks.com
6863 Egg AUSTRIA www.pslocks.com
ARTICLE NUMBER
CUSTOMS TARIF NUMBER
COUNTRY OF ORIGIN
FIT13
83013000
Austria
Irrtümer und Änderungen vorbehalten. Technische und Design-Änderungen vorbehalten
Errors and omissions expected. Technical and desing-modifications are subjects to change.
Weitere Informationen entnehmen Sie bitte unserer
Website. Further information you can find on our website.