Duronic PF1D Gebrauchsanleitung Seite 8

Initial Setup:
1. Connect the charging cable to the Photo Frame and plug into an electrical
outlet.
2. You can place the frame on a surface using the Dock/Stand. You can also use
the photo frame as a tablet without the Dock/Stand.
3. Turn on the frame by holding down the power button.
4. Follow the on-screen instructions to choose your language, connect to wifi,
and set the date and time.
Uploading Photos:
1. Open the Frameo app on your smartphone or other smart device and log in to
your account.
2. Make sure your device is connected to the internet.
3. Use the dropdown menu to select the folder location of the photo you wish to
upload.
4. Tap the photo or video you wish to upload, then tap the arrow in the corner.
5. Select the recipient frame. Tap the arrow to confirm.
6. Write a caption (optional) to go with the photo. Tap the arrow to confirm.
7. For a photo, select the most important part of the image e.g. face, subject,
building. This is important for when the image rotates. For a video, trim the
video to the desired length and keep/remove the audio. Tap the arrow to
upload.
8. The new photo/video should now appear in the photo frame.
How to Use the Photo Frame
8