Safety Warnings - Proled Rf Dmx Converter Bedienungsanleitung

，Preface
Thanks for choosing PROLED RF DMX CONVERTER. Before installation and use, we strongly
recommend you to read this manual carefully. If the device has been damaged during transport,
please report this to your supplier immediately. Please don't take any action without contacting
your supplier first
ҟ
Limited Warrenty
In case of quality problems we provide free repair or replacement within one year from the day of
purchase, if this product has been used properly in accordance with the user's manual, except in
following cases:
1. Any defects caused by wrong operation.
2. Any damages caused by unauthorized removal, maintenance, modifying, incorrect connection
and replacement of chips.
3. Any damages due to transportation, vibration etc. after purchase.
4. Any damages caused by earthquake, fire, lightning, pollution and abnormal voltage.
5. Any damages caused by negligence, inappropriate storing at high temperatures and humidity
or near harmful chemicals.
6. Product has been updated

Safety Warnings

1. Please don't install this converter during thunderstorms, intense magnetic or high-voltage
electrical fields. To reduce the risk of component damage and fire caused by a short circuit,
make sure, that all connections are correct.
2. Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
3. Check voltage and power requirements of the converter as well as the polarity of the power
supply.
4. Never connect any cables while power is switched on and always assure correct connections
to avoid short circuit before switching on.
5. Never attempt any repairs yourself; otherwise the manufacturer's warranty will be void.
6. For update information please consult your supplier.
1. Product Description
PROLED RF DMX CONVERTER allows converting of RF-signals of remote control into DMX-
signals. These can be used, with corresponding DMX-controllers, for controlling of Luminairs,
Panels, Flex Strip etc. Depending on the used RF remote control, up to 8 zones can be controlled.
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg - Germany
07.17. Technical amendments reserved
Bedienungsanleitung / User's manual
www.proled.com