Werbung
EN - QUICK START GUIDE
IMPORTANT!
When first taking your earbuds out of the packaging,
please remove protective film covering the charge points.
Let's Stay Charged
Note: If your earbuds and charge case do not have any power when you first
unpack them, place the earbuds into the charge case and plug the charge
case into a USB port using the USB C cable [8 provided.
The Earbuds
A voice prompt "Battery low" allows for 2 minutes play time before the earbud(s)
powers down stating "Battery low, power off". The Earbuds LED Light [2]
will flash WHITE once and will then switch off. Charge the earbuds using the
5
Portable Charging Case [5] .
Each LEFT and RIGHT earbud has 4-line LED Charge Indicators L and R on
the case.
Place the earbuds in the case and close the lid to charge.
The 4 LED indicators L and R will flash to show that the earbuds are charging
for 15 seconds and then will turn off.
The Portable Charging Case
To check the battery status of the case, open the lid of the Portable Charging
5
Case
[5] . The LED Digital Display
battery remaining for 15 seconds.
[EN]
1
8
2
6
[6]
will show the percentage of the
Always connect the case to a suitable USB wall charger, computer USB port
or a power bank using the USB Type C charging cable [8] supplied. Plug
the supplied cable into the USB C port [7] on the charge case.
When the LED Digital Display number reaches 100 (i.e., 100%) the case is
fully charged, and the display will switch off.
Charging the case may take up to 2 hours.
TIP: 15 MINUTE QUICK CHARGE
If you're running low on power, charge your earbuds in the case for 15
minutes and get 2 hours extra play time while on the go
Let's Connect
First time pairing
When you open the Portable Charging Case
on and connect together. A voice prompt will confirm with 'Power on, pairing'.
2
One Earbud LED Light
[2]
will flash WHITE to indicate pairing mode.
Go to the Bluetooth settings on your audio device to select 'MIXX
StreamBuds Ultra ANC' from the list. Once paired successfully you will hear
'Connected' and the Earbud LED Lights
turn off.
You can now enjoy your music, watch a video or take a call hands free. The
earbuds will automatically reconnect to the last device they were paired with,
confirming 'Connected'.
Placing both earbuds back in the Portable Charging Case (5) and closing
the lid will power them off.
FACTORY RESET
When in pairing mode, independently 'tap' 4 times until power off is
announced, return bud to case. repeat with other bud. This will complete the
Factory Reset process.
2
8
7
5
[5]
both earbuds will turn
2
[2]
will
5
[EN]
Werbung
