Werbung
EN - QUICK START GUIDE
Let's Stay Charged
Note: If your earbuds and charge case do not have any power when you first
unpack them, place the earbuds into the charge case and plug the charge
case into a USB port using the USB C cable [8] provided.
The Earbuds
A voice prompt 'Battery low' allows for 2 minutes play time before the earbud
powers down stating 'Battery low,
2
power off'. The Earbuds LED Light [2] will flash WHITE once and will then
switch off.
Each LEFT and RIGHT earbud has 4-line LED Charge Indicators [L] and
[R] on the case.
R
Place the earbuds in the case and close the lid to charge.
L
R
The 4 LED indicators [L] and [R] will flash to show that the earbuds are
charging and will turn off once the earbuds are fully charged.
TIP: 15 MINUTE QUICK CHARGE
If you're running low on power, charge your earbuds in the case for 15
minutes and get 2 hours extra play time while on the go
8
L
1
The Portable Charging Case
To check the battery status of the case, open the lid of the Portable Charging
4
Case [4] . The LED Digital Display [6] will show the percentage of the
B
battery remaining [B] for 15 seconds.
You can charge the case in two ways:
1. With a Type C charging cable
Always connect the case to a suitable USB wall charger, computer USB port
or a power bank using the USB Type C charging cable
the supplied cable into the USB C port
When the LED Digital Display number
case is fully charged, and the display will switch off.
2. Qi wireless charging
At the base of the case is a wireless charge surface
flat on a Qi Wireless Charger (sold separately).
When the LED Digital Display number reaches 100 (i.e., 100%) the case is
fully charged, and the display will switch off.
Charging the case may take up to 2 hours.
Let's Connect
First time pairing
When you open the Portable Charging Case
and connect together. A voice prompt will confirm with 'Power on, pairing'.
2
One Earbud LED Light
[2]
will flash WHITE to indicate pairing mode.
Go to the Bluetooth settings on your audio device to select 'MIXX
StreamBuds Mini Charge 2' from the list. Once paired successfully you will
hear 'Connected' and the Earbud LED Lights
You can now enjoy your music, watch a video or take a call hands free. The
earbuds will automatically reconnect to the last device they were paired with,
confirming 'Connected'.
6
8
[8]
supplied. Plug
5
[5]
on the charge case.
B
[B]
reaches 100 (i.e., 100%) the
7
[7]
. Place the case
4
[4]
both earbuds will turn on
2
[2]
will turn off.
2
Werbung
