Setup
Extendable Metal Pipe And Charged of the broom Assembly
Charged your broom left with your hand tobacco And Right your hand using extendable
Metal pipe vertical One way accessory entrance in its place full will sit way conductive with a
needle Align and place. You will hear a "click" sound when the installation is complete. With its
extendable feature your pipe extension key pressing pipe your length can adjust, your pipe
You can turn it on and off.
ATTENTION: Conductive of the needle with socket because it is aligned sure be.
LED illuminated motorized Turbo of the brush Installing
led illuminated motorized turbo- the brush left with your hand tobacco Right your hand using Attach
the extendable metal pipe vertically to the LED illuminated motorized turbo brush. Align it with the
conductive needle and Press the handle until you hear a "click" sound.
ATTENTION: Conductive of the needle with socket because it is aligned sure be.
LED illuminated motorized Turbo of the brush Removal
If you need to remove the LED illuminated motorized turbo brush while packing, storing or
cleaning the product , press the motorized turbo brush removal button and pull and remove the LED
illuminated motorized turbo brush head.
Wall Hanger of the apparatus Assembly
After the installation of your upright vacuum cleaner is completed, check the wall hanging
bracket with a tape measure. height steep charged your broom to the ground parallel will
be way measure and mark the wall. Fix the 2 dowels in the box to the wall using a drill. Place
the wall hanging bracket parallel to the dowels and fix your 2 screws with the help of a drill.
Place your rechargeable vacuum cleaner on the hook of your fixed wall hanging bracket. you
can place it.
Screw
Hole
16
Wall Hanger
Apparatus
Pass hook