MSW Motor Technics MSW-RF10S Bedienungsanleitung Seite 12

8. Insert the top mount section.
9. Connect the power and press the yellow "down" button. Release the steel wire and complete the steel
wire operation steps as shown in the image below. This should be done before lifting the installed frame
onto the wall to prevent it from falling during lifting.
1- This is done before raising the frame to the wall, to prevent the frame from detaching when it is lifted.
10. Work with at least two other people to lift and position the installed frame securely.
EN
1- Insert the tray into the top tube section
1- Insert the top mount section