OPERATION INSTRUCTION
1. Use as directed:
This product exclusively serves lighting purposes and may
• Not be exposed to strong mechanical loads or to strong contamination�
• Only be installed and operated after a condition inspection in case the product is
dirty or has been moistened through storage�
2. Technical data:
• Power 1�1W
• Operating voltage: DC 3�7V
• Luminous flux: 100lm
• LED: OSRAM 2835 SMD
• Lithium battery: 18650 / 2200mAHh
• Charging time: 3,5h
• Operating time: 10h
• Class: III
• Safety type lamp: IP65
• Safety type charging base: IP20
3. Charging:
1) This product can be charged with a mobile phone charger that fulfills the following criteria:
2) INPUT: AC100-240V 50/60Hz, OUTPUT 5V – 1A, USB line 1�5M
3) ATTENTION: INDOOR only!
4) Place the magnetic charging cable at the base of the lamp�
5) An orange indicator light is illuminated during the charging process� Once
the lamp is completely charged, the orange light will turn off�
4. Instructions:
1) With a light press (< 1s) on the top, the light is switched on� Pressing again switches the light off�
2) Brightness (when the luminaire is on): If the top of the luminaire is turned clockwise, the luminaire beco-
mes brighter� If the top of the luminaire is turned anticlockwise, the luminaire becomes darker�
3) Light colour (when the luminaire is on): If the top of the luminaire is pressed and turned clockwise at the
same time, the light colour becomes colder (4000K)� If it is pressed and turned anticlockwise, the light
colour becomes warmer (2200K)�
4) Candlelight (when the luminaire is on): The top must be pressed and turned anticlockwise until 2200K is
reached� Then turn the top counterclockwise until the candlelight mode (1800K) is started�
5. Attention:
1) Charge the battery fully before first use.
2) The battery has an overcharge protection function;
3) Please refer to the local environmental law for recycling and disposing of the battery�
4) Please charge the lamp regularly, otherwise the battery life may be affected�
GB
| 7