Nexigo P5 CON STAND SET-1520WHT Benutzerhandbuch Seite 5

Step 3: Take the Type-C adapter out from the storage
slot, insert the Type-C adapter to the control ler, and
place it on the charging dock to get charge.
OZO
o
O Product Instructions:
1. Connect
Cooling Stand by using the provided screw. Attach
it direct y from the bottom
screwdriver.
2. Insert the USB Type-C connector
the rear and plug the 5V/3A adapter into a power
source.
3. The NexiCo Multifunctional
ready for use!
4. P-5 controllers
chargers on the side of the cooling stand for charging.
5. While charging, the light panel wil display an orange
breathing
charging, the light will be synchronized
inserted controller. The light panel wi turn to a
steady blue light after all charging controllers
fully charged.
6. The fan control switch on the back of the cooling
stand controls the speed of the cooling fan and can
be togg ed as needed between the speeds (high,
medium,
7. Remove the USB Type-C adapters from the controllers
and place them in the adapter storage slots on the left
/ right side next to the controller charging area when
charging is complete.
8. In order to maximize
please do not remove the controllers while they are
being charged
reaches 80% or above. if you remove the controller
and put it back the controller will not be able to
continue charging
the console
(Screwdriver
can now be placed onto the controller
light to indicate the control lers are
low. off).
When the battery level of the controller
due to the battery protection
to the NexiCo
Of the console using a
not included.)
Cooling Stand is now
the lifespan of the P-5 controllers,
Multifunctiona
into the stand at
with the first
are