i-box Impulse Bedienungsanleitung Seite 8

Pairing a Bluetooth audio source
To play music from your phone, tablet or mp3 player wirelessly pair it with the soundbar.
Enter the Bluetooth mode by pressing the BT button (13),the LED on the soundbar will flash to indicate the device is
searching for devices. Open the Bluetooth menu on your device, look for 'i-box Impulse' tap that to connect. When
paired successfully the LED on the soundbar will be solid.
MODE USB
AUX OPT HDMI ARC
< Bluetooth
On
1 Bluetooth device is connected
PAIRED DEVICES
i-box Impulse
Connected
If it doesn'tshowthe first time,movecloserand searchfor newdeviceagain.
Now select a piece of music, podcast, audio book etc. and play! Adjust the volume on your device first then on the
soundbar to avoid sudden volume increases when changing source.
Auto Power Off
Please Note: If there is no signal input to the soundbar for 15minutes continuously in BT mode it will
automatically power off, and the red LED will come on. Short press the Power On/Off key (1)on the remote
control or the Power key (10) on the soundbar to turn the unit back on.
08 | Impulse
< Bluetooth
SCAN
On
Bluetooth devices have been found
AVAILABLE DEVICES
a i-box I ulse
You don't need to re-pair. Your
soundbar will automatically reconnect
with this device when it is in range and
both are turned on.
i -box