Milwaukee TH300 Gebrauchsanleitung Seite 2

DESCRIPTION
Remote temperature measurements require
a versatile thermometer with a remote probe
that can be used in hard-to-reach spots. The
meter must also be easily readable at an
angle.
TH300 is equipped with a stainless steel
general use probe and a 1 meter cable to
make remote reading a simple task.
LCD
ENVIRONMENTALLY FRIENDLY
TH300 does not contain any Mercury or
leaded glass. These materials are typical of
glass thermometers and are hazardous to our
environment and your health.
TH300 will not break like glass thermometer,
and its extended range will replace 2 or more
standard glass thermometers.
TH300 provides a rapid response time, and a
battery that lasts up to 1 year.
SPECIFICATIONS
Range -50.0 to 150.0 °C
Resolution 0.1 °C
Accuracy ±0.5 °C (-20 to 90 °C)
Typical EMC
±0.3 °C
Deviation
Stainless Steel
Probe
with one meter cable
Switch ON/OFF no
Calibration
no
Check
Environment 0 to 50 °C; max RH 95%
Battery Type 1 x 1.5V AAA
Battery Life approximately 1 year
Packaging
225 x 91 x 47 mm
dimensions
Packaging
140 g
weight
BATTERY REPLACEMENT
When the TH300 fades, pull out the rear cover
and the 1.5V battery, paying attention to the
polarity. Batteries should only be replaced in
a safe area using the battery type specified in
this instruction manual.