PDP Phantom Aire Bedienungsanleitung Seite 3

b. Connecting the headset
Connecting to your PS5® console or PS4® console
a. Power on your console.
b. Plug the USB dongle into any USB-A port on your console.
c. Make sure the Mode switch is in the down position (Dongle Mode).
d. Press and hold the power button located on the left earcup of the headset until the LED light turns on.
e. The headset should automatically pair to the dongle.
Connecting to PC*
a. Follow the same steps from above, except plug the USB dongle into any USB-A port on your PC.
Connecting to Bluetooth
a. Make sure the device that you are pairing to has Bluetooth on.
b. Make sure the Mode switch on the headset is in the up position (Bluetooth Mode).
c. If this is the first time connecting a device to the headset, press and hold the Bluetooth button on the
front of the headset.
d. On the Bluetooth settings of your device, select "Phantom Air Wireless Headphone" to connect the
headset.
When connected, you will hear a "Bluetooth Connected" voice prompt and the LED status light will turn
solid. Once the connection is made with your device, you can automatically pair with it in the future if the
device has Bluetooth turned on.
*PC compatibility (Windows 10/11) not tested nor endorsed by Sony Interactive Entertainment.
c. Pairing the headset to the dongle
If the headset does not automatically pair, you may need to re-pair it.
The headset needs to be disconnected from Bluetooth before you can re-pair it
a. Make sure the headset is off. If the headset is on, press and hold the power button until the LED turns
off.
b. With the dongle plugged into your PlayStation® console, power on your headset.
c. Press and hold the blue button on the dongle and double press the power button on the headset. Once
a connection has been made you will hear a tone.