TAVIALO WerkFix Kraft Gebrauchsanweisung

This manual covers three WerkFix Kraft brush sets:
134.001.601 — 6-piece
cleaning brush set with soft
bristles (white)
134.006.601 — 6-piece
cleaning brush set with hard
bristles (black)
1. Purpose
WerkFix Kraft cleaning brush sets are designed for cleaning metal,
plastic, ceramic, and other hard surfaces. They are used to remove
dirt, rust, paint, and other contaminants. Each set of brushes differs
in the stiffness of the bristles:

Soft bristles (white) — for delicate cleaning.

Medium bristles (blue) — for universal cleaning.

Hard bristles (black) — for intensive cleaning and removing
tough contaminants.
2. Key specifications
WerkFix Kraft brush sets include 6 different brushes and a bit
extender. The brushes are made of durable polypropylene, making
them wear-resistant and long-lasting. They are compatible with drills
and screwdrivers, thanks to a hexagonal shank.
The set includes:
1. Flat brush 5.1 cm — for precise cleaning of small areas.
2. Flat brush 10.2 cm — for cleaning medium-sized surfaces.
3. Flat brush 12.7 cm — for working with large flat surfaces.
4. Half-round brush 13.8 cm — for cleaning corners and
rounded surfaces.
5. Disc brush 8.3 cm — for processing curved or complex
surfaces.
6. Bit extender 15 cm — for working in hard-to-reach places.
Differences between sets:
EN: USER MANUAL
134.004.601 — 6-piece
cleaning brush set with
medium bristles (blue)
WARNING! Use personal protective equipment.

Item 134.001.601 — soft bristles (white) for delicate
cleaning.

Item 134.004.601 — medium bristles (blue) for universal
cleaning.

Item 134.006.601 — hard bristles (black) for intensive
cleaning and removing tough contaminants.
3. Safety precautions when using the tool
3.1 Wear a respirator to protect your respiratory system from
dust and fine particles.
3.2 Always use safety glasses to prevent particles and sparks
from entering your eyes.
3.3 If necessary, wear a face shield for additional facial
protection.
3.4 Wear protective clothing, including gloves, a long-sleeved
jacket, and an apron, to protect your skin from sparks and hot
particles.
3.5 Keep the workspace clean. Regularly remove chips, dust,
and other debris.
3.6 Always inspect the brush for damage or wear before
starting work. Do not use damaged tools.
3.7 Avoid applying excessive pressure to the brush. Allow the
tool to work at its optimal speed.
3.8 Always keep hands and clothing away from the moving
parts of the tool.
3.9 Ensure no bystanders (especially children) are present
during operation.
3.10 Not intended for use by children.
3.11 Hold the tool firmly during operation.
3.12 If the tool has sustained physical damage, deformation, or
wear during use, further operation may result in injury. Such a
tool should not be used further.
3.13 Improper use of the tool can lead to injuries to the hands,
eyes, face, or other body parts.
The company is not responsible for misuse of the tool, use of a
damaged or worn tool, or using the tool for purposes other than
intended.
Remember to follow these safety measures to prevent injuries
and maintain a safe working environment.
4. Preparing the tool for work
1. Choose the brush according to the type of dirt.
2. Attach the brush to the tool.
3. Inspect the brush for damage.
4. Adjust the tool to the optimal speed for the selected brush.
5. Usage
1. Start work at low speed and gradually increase the speed.
2. Apply minimal pressure to the surface.
3. Turn off the tool before replacing the brush or inspecting
results.
Immentalstr. 50, 79104 Freiburg, Germany
Follow the instruction.
TAVIALO UG
info@tavialo.de, https://www.tavialo.de