postQuam infinium Bedienungsanleitung Seite 10

'ON/OFF/READY' indicator light.
• STEP 4. Press the power button to select the power level
that suits your skin type. When a level is selected, the
indicator light will show as green on that level.
• STEP 5. To use, press the bulb area firmly against your
skin. When the surface is in full contact with the skin, the
'ON/OFF/READY' indicator light will start to flash.
• STEP 6. Press the pulse button to release a pulse of
light. You will feel a slight warm and tingling sensation on
your skin.
• STEP 7. Remove the unit from the skin and avoiding
gaps, place the unit back on the skin for the next pulse.
The pressure marks left on your skin will indicate where
you have treated. Never treat the same patch of skin more
than once during each treatment session.
• STEP 8. At the end of your session, switch off by
pressing the power button for 2 seconds. Unplug the
adapter from the mains.
Please note: There are two different modes available,
depending on the area you want to treat:
• The Precision mode is designed to treat sensitive, delicate
areas of the body (i.e. face, underarms and bikini line).
• The Glide mode is suitable for larger areas (i.e. legs,
back, arms or torso). Place on the skin and press and hold
the pulse button. Between each pulse glide the unit over
the skin without lifting to the next treatment area. To
deactivate this mode, release the pulse button.
Approximate usage times are as follows:
- Half-leg: 8 -10 minutes in Glide mode.
10