Sabrent Connecting Differently EC-M2CU Benutzerhandbuch Seite 2

EN
EC-M2CU
User Manual
How to use:
Step 1. Open the enclosure to prepare it for drive installation.
Step 2. Insert the M.2 SATA SSD and carefully connect it to the adapter.
Step 3. Carefully close and secure the enclosure.
Step 4. Install and connect the enclosure to the host device/system via a free
SATA port and cable or a USB cable, as applicable to the enclosure type.
Note: Drives may be prepared with an application like Disk Management in
Windows, Disk Utility in macOS, or GParted in Linux.
File system and file type support depend on the host operating system.