SIHOO M57 Bedienungsanleitung Seite 2

User Manual
Assemble Introduction
(The size will be according to regular measurements)
1 2
Use 10 screws of M6*12 specification to fix First, insert the chair foot trim cover into the chair
the five chair leg tubes to the chair leg tube foot, and then put the air pressure rod into the
connection base and then insert the wheels;
middle hole of chair leg tube connection base;
4 5
Fix the mechanism to the seat cushion Fix the back plate to the seat cushion
with 4pcs small shim and 4pcs with 3pcs big shim and 3pcs
(M6*20) screws.
7
SIHOO
Insert the headrest into the slot.
1.Please use on the flat floor and one chair can only bear one person's weight;
Pls read the Safety
2.To avoid using the wrong screws, please fix all the screws before tightening them;
Instructions below
3.Please don't let the child sit on the chair alone if he is under 5 year-old;
carefully.
4.Please don't sit on the armrest, in case cause some danger;
5.Do not stand on the chair or use it as a ladder or footsteps;
6.Please don't overweight on the chair, or used as trolley;
7.Don't use sharp or hooked objects to scrape the chair and do not get it close to the fire;
8.To avoid any harm to your fingers.
Don't insert your finger into the mechanism while sitting.
3
Fix the armrest to the seat cushion
with 6pcs small shim and 6pcs
(M6*20) screws.
6
Put the mechanism into the gaslift.
(M8*45) screws.
Functions
(The size will be according to regular measurements)
3D armrest(height;
horizontal;forward and
backward adjustment)
Seat height
adjustment
Backrest tilt angle
adjustment
Parts list
(The size will be according to regular measurements; One more as a backup)
Castor:5pcs Chair leg tube:5pieces
Seat cushion:1pc Backrest:1pc
Small Shim:10+1pcs Big Shim:3+1pcs
Armrest screw/Mechanism screw(M6*20):10+1pcs
Chair leg screw(M6*12):10+1pieces
0 1 2 3 4
Headrest height
adjustment
Lumbar support depth &
height adjustment
Backrest tilt tension
adjustment
Gas lift:1pc Armrest:1pair
Mechanism:1pc Hex wrench:1pc
Back plate screw(M8*45):3+1pcs
Headrest:1pc
Notice: Before installation,
pls classify the screw,
Chair leg tube connection base:1piece
measure the screw lengh
for easy assemble
Chair foot trim cover:1piece
5 6 7 8 9 10 cm