Secret Lab MAGNETIC ETHERNET CABLE EXTENDER Bedienungsanleitung

PRODUCT SPECIFICATIONS
Dimensions: 50.5 (L) x 41.0 (W) x 1146.0(H) mm (1.9 x 1.6 x 45.1")
Weight:
0.5 kg (2.2lbs)
Height Adjustment Range: 525.0 mm - 1146.0 mm (20.6 - 45.1")
Ethernet Cable Classification:
CAT 6
525.0 mm
INSTALLATION GUIDE & USER MANUAL
01 PREPARE 02 INSTALL
Prepare 2 sets of male-to-male Ethernet cables. Place your Secretlab Magnetic Ethernet Cable Extender on the backside of your MAGNUS Pro's leg — it will
(Not included)
attach magnetically. Ensure that the Ethernet Cable Extender is fully extended as shown.
Raise your Secretlab MAGNUS Pro to height Adjust your desk to the lowest height to check if the Ethernet Cable Extender is installed correctly.
between 85-95cm.
(There should not be any obstruction/deformation when retracting to the lowest height)
X2
85cm
-
95cm
Note: Secretlab Magnetic Ethernet Cable Extender Note: If you are installing it on the leg with power socket,
supports up to CAT 6. slide the Ethernet Cable Extender as shown to avoid
unplugging the power cable.
50.5 mm
03 CONNECT
Connect your Ethernet cables to your Ethernet wall outlet/router and PC/laptop.
Ensure that your cables are fully inserted — push them in until you hear a 'click' sound.
Route your Ethernet cable via the cable tray for better cable management experience.
Note: The Ethernet Cable Extender is compatible Ethernet wall outlet/router to the Ethernet
with both legs of the MAGNUS Pro. Cable Extender.
S E C R E T L A B M AG N E T I C E T H E R N E T CA B L E E XT E N D E R
D E S I G N E D FO R S E C R E T L A B M A G N U S P R O
The blazing speed of wired Ethernet, with none of the tangle. Connect your PC directly to your router with
the Secretlab Magnetic Ethernet Cable Extender and enjoy high-speed, low-latency connections, without
any dangling cables. Adjust your desk between 650mm and 1250mm — the Ethernet Cable Extender
automatically extends and retracts, so you never have to worry about cable strain or mess.
AFTERCARE GUIDE
Do not use your Ethernet Cable Extender outside of its intended usage.
Improper use can damage your Ethernet Cable Extender or even cause injuries.
To ensure your safety, always follow the given instructions.
Clean with damp cloth.
Use a solution of mild soap and warm water applied to a damp cloth to remove
dirt and impurities. Dry with a clean cloth immediately afterwards.
Do not use abrasive scrubbers or harsh cleaners.
Avoid abrasive cleaners as they can damage your
Ethernet Cable Extender.
USE AND LIABILITY
OTHER LANGUAGES
Ethernet Cable Extender to PC/Laptop.
Do not abuse it.
Keep your Ethernet Cable Extender away from impacts,
drops and sharp objects.
Avoid exposure to direct or prolonged sunlight.
Do not expose your Ethernet Cable Extender to direct
and prolonged periods of sunlight or heat sources
as fading and cracking of the surface finish may occur.
The Secretlab Magnetic Ethernet Cable Extender is designed for indoor use and dry
work areas only. Under no circumstances does the manufacturer accept warranty
claims or liability claims for damages caused from improper use or handling of the
Ethernet Cable Extender. For warranty terms and service or any other queries, scan
the QR code or visit our website secretlab.co/support.
To view this manual in the following languages, please scan the QR Code to the left.
Pour consulter ce manuel dans les langues suivantes, veuillez scanner le QR code à
gauche.
Um dieses Handbuch in den folgenden Sprachen anzuzeigen, scannen Sie bitte den
QR-Code auf der linken Seite.
Scan de QR-code naar links om deze handleiding in de volgende talen te bekijken.
이 설명서를 다음 언어로 보시려면 왼쪽에 있는 QR 코드를 스캔하세요.
Untuk melihat panduan ini dalam bahasa lainnya, silakan scan QR code di sebelah
kiri.