Ecosense RadonEye RD200 Bedienungsanleitung Seite 5

6. The values of current measurements will be displayed in 10-minute
intervals and an average value will be logged every 60 minutes into your app.
When the measured result is greater than the 4pCi/L (148Bq/㎥) EPA action
radon level, an alarm will sound if it is enabled.
How to save data
1. Please click the "DATA" tab.
2. Click the chart area to load data from the
device.
3. Click the "Save Current Log Data" button to
save the data.
4. Name the file and click "Save".
5. Click "Yes" to open the data or click "No" to
save the data to the app. The saved data can
be found later in the "Saved Log Data" menu.
6. Click the Export button in the upper right
corner and select the desired export option.
(Email, message, local folder, note, etc.)
English