Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
■
Do not use the product under a cover or the like, to avoid
overheating.
■
Unwind the cable completely before connecting it to a USB
power adapter.
NOTICE – risk of material and property damage
■
Do not connect the product to a computer, as the high charging
current could damage the computer.
■
Only connect the USB mains adapter to properly installed
sockets that match the technical data of the product.
■
Ensure that the cord is not crushed, kinked or laid over sharp
edges, and that it does not come into contact with hot surfaces.
■
Never place heavy objects on the cable.
■
Do not use distilled water.
■
Protect the product from: impact, fi re, heat, direct sunlight,
sub-zero temperatures.
■
Only use original accessories from the manufacturer so as not
to impair the functioning of the product and to prevent possible
damage.
■
In case of damage/malfunction, switch off the product imme-
diately.
■
Do not make any changes to the product and do not try to repair
it. In case of damage contact customer service.
■
The individual LEDs cannot be replaced.
■
Do not insert anything into the product's air vent, and ensure
that it is not clogged up.
■
Never use corrosive or abrasive cleaners for cleaning. These
can damage the surface.
Included in delivery
1 x diff user unit with LEDs
1 x glass cylinder
1 x cover
1 x cable (USB-A connector to micro-B-connector)
1 x operating instructions
A USB mains adapter is also required for use. This is not
included in the delivery!
Check the scope of delivery for completeness, and the compo-
nents for transport damage. If the product is damaged, do not use
the product but contact customer service immediately.
Remove all fi lm, stickers and transport protection from product.
Never remove the type plate or any warnings.
Product Overview
8
7
6
5
4
3
2
Usage
1. Place the product on a table or other dry, level, solid surface
that is resistant to moisture.
2. Remove the glass cylinder (1) from the diff user unit (5) by pull-
ing it up.
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany •
09260_DE-EN-FR-NL_A4_V2.indd 3
09260_DE-EN-FR-NL_A4_V2.indd 3
3. Remove the cover (8) and fi ll the water reservoir (7) with water
4. Place the cover back on the water reservoir. Make sure it fi ts
5. Place the glass cylinder back on the diff user unit.
6. Plug the micro-B-connector on the USB-cable into the
7. Connect the USB-A connector to a USB mains adapter and
8. Hold down the LIGHT switch (2) for approx. 4 seconds. The
9. Press the MIST switch (3) to switch off the water evaporate
10. To switch off the product, hold down the LIGHT switch again
11. When product is not in use, unplug the USB mains adapter
Cleaning and Storage
•
•
•
Technical Data
1 Glass cylinder
2 LIGHT switch
Disposal
3 MIST switch
4 Connection
socket (on the
1
backside)
5 Diff user unit
6 LEDs
7 Water reservoir
8 Cover
Customer Service / Importer:
*) Calls to German landlines are subject to your provider's charges.
All rights reserved.
(max. 120 ml) using a measuring cup or something similar. If
necessary, add 2 – 3 drops of essential oil.
correctly.
connection socket (4) on the diff user unit.
plug it into an easily accessible socket.
LEDs (6) turn on (colour change) and the product starts to
evaporate the water.
To set a colour permanently, press the LIGHT switch again
when this colour appears. The colour change stops. Repeat
this to select a diff erent colour.
function.
for approx. 4 seconds.
The product switches off automatically if there is no longer
any water in the water reservoir.
from the socket and then the cable from the diff user unit.
Clean the water reservoir (7) with a damp cloth and a little mild
detergent if necessary to remove any oil residues.
If necessary, wipe down the diff user unit (5) with a slightly
damp cloth. Then dry all parts thoroughly.
When not in use the product should be stored in a dry place
which is not accessible to children and animals.
Article number:
ID operating instructions:
Model number:
Voltage supply: :
Power:
Evaporation volume:
Water reservoir:
Dispose of the packaging material in an environmentally
friendly manner and take it to a recycling centre.
This product is subject to European Directive 2012/19/EU
on Waste Electrical and Electronic Equipment (WEEE). Do
not dispose of this product as normal household waste, but
through an offi cially approved disposal business according
to environmental regulations.
✆
+49 38851 314650 *)
Operating Instructions
09260
Z 09260 M DS 0120 V2 uh
AJ-216A
5 V DC
5 W
10 – 15 ml
max. 120 ml
06.01.2020 14:12:04
06.01.2020 14:12:04
Werbung
