Self-clean function
If you need to clean the unit before extracting juice from
another type of vegetables or fruit, use the self-clean
function.
–
Switch on the juice extractor and pour a glass of water into
the feeding chute (3), most pulp from the previous extract-
ing will be removed.
–
Clean and wash the pulp container (15) and the juice
cup (14).
–
Clean the slow juicer completely after every usage (see
chapter «CLEANING AND CARE»).
TIPS
•
Use only fresh fruits and vegetables, as they contain
more juice.
•
For juice extracting you can use different vegetables, such
as carrots, cucumbers, beets, celery stems, spinach,
tomatoes or fruits: apples, grapes, pineapples, pome-
granate seeds.
•
It is recommended to wash berries right before juice
extracting, as they lose freshness quickly.
•
It is not necessary to remove thin peel from fruits or vege-
tables, remove thick peel only, for example, from pineap-
ples, beet, bananas and citrus fruit.
•
When extracting apple juice remember that its richness
depends on the apple sort.
•
Choose the apple sort from which you can make juice to
your taste.
•
Remove big stones from the fruit, as they can damage
the unit.
•
For better taste and diet purposes you can extract juice
from lettuce, spinach, fresh herbs and soy (it is necessary
to preliminary steep soy beans in water for 10 hours before
extracting juice).
•
The juicer construction enables to keep maximal amount
of nutrients in the extracted juice, that's why the juice is
cloudy as it contains the pulp.
•
Drink juice right after you made it. The juice loses its taste
and nutrition value during long storage in open air.
•
We recommend to wash down freshly-made vegeta-
ble juice with some water because its concentration is
very high.
•
Apple juice gets dark quickly, but adding a few drops of
lemon juice slows down the process of juice darkening.
•
If you keep juice in the refrigerator, pour it into a clean
bowl with a lid to prevent it from absorbing the smell of
other foods stored in the refrigerator. It is not recom-
mended to keep juice in a metal container, as the juice
can acquire corresponding flavor.
Attention! The slow juicer is not intended for processing
extra hard and fibrous fruits or vegetables, such as coco-
nuts or quince.
CLEANING AND CARE
After the end of operation or before cleaning always switch
the unit off and unplug it. Disassemble and clean slow
juicer after every usage:
–
remove the pusher (1) from the feeding chute (3);
–
remove the food tray (2);
–
remove the lid (7) by rotating the lid (7) clockwise until
it bumping
;
–
press the lock button (4), remove the feeding chute (3)
from the motor unit (12);
–
remove the mesh filter (6) from the chute (3);
–
remove the screw (5) from the chute (3);
–
it is more convenient to wash the mesh filter (6) open-
ings from the outside using a small brush (11);
–
do not wash the screw (5) and other removable parts
in the dishwasher.
•
It is recommended to wash all the removable parts (1, 2,
3, 5, 6, 7, 14, 15) with warm water and neutral detergent
right after you finish using the juice extractor.
•
Clean the motor unit (12) with a slightly damp cloth and
then wipe it dry. Do not immerse the motor unit (12) in
water or any other liquids; do not wash it under water jet.
•
Do not use coarse sponges, abrasives and solvents to
clean the slow juicer.
•
Some products, such as carrots or beets, can dye slow
juicer removable parts, you can use dry cloth damp-
ened in vegetable oil for removing stains; after clean-
ing of parts wash them with warm water and a neutral
detergent, then dry.
STORAGE
•
Before putting the unit away for storage, make sure it
is unplugged.
•
Follow the requirements of the «CLEANING AND CARE»
section.
•
Keep the unit in a dry cool place out of reach of children
and disabled persons.
DELIVERY SET
Juice extractor assembled – 1 pc.
Juice cup – 1 pc.
Pulp container – 1 pc.
Brush – 1 pc.
Instruction manual – 1 pc.
Warranty certificate – 1 pc.
8