Unitek R1005A Bedienungsanleitung Seite 6

A: Please check whether the upstream interface is a USB3.2 Gen2
10GB interface. Theoretically, the read and write rate can reach up
to 940MB/S. This product is backward compatible with USB3.0 and
USB2.0 rates, please also pay attention to the transfer rate standard
of the memory card used.
Q: Why can't the card be displayed correctly after connecting to the
computer?
A: It is recommended to insert a memory card, then connect the
computer USB interface. In Disk Management, check whether the
partition is initialized and formatted into the partition file system
you need.
Q: Why is there a failure to read and write data?
A: Please re-plug the connector and a memory card connection
interface between the computer, confirm the correct connection
between the parts, to prevent poor contact.
Q: How to format CFexpress card?
Note: To avoid data loss, please back up the data in the card before
formatting the CFexpress card.
A: 1) Window:
Open "Computer Management"-"Disk Management", find the disk
number of the memory card, right-click "Format"-select the format
you want to use in the file system, and click "OK" to start formatting
until completion.
2) Mac OS:
On the Apple desktop, click Finder-Programs-Utilities-Open Disk
Utility. Select the CFexpress card disk to be formatted on the left,
select the format tab you want to use, format and fill in the label (name
of the disk), click on the "erase" to start formatting to completion.
3