Safety Instructions - Seven Ops Gebrauchsanleitung

Safety Instructions

1. Before inserting or removing the OPS, or connecting or
disconnecting any signal cables, make sure that the power of
the IFP (Interactive Flat Panel) is turned off and the power cable
is unplugged from the display.
2. To avoid damage caused by frequent start up and shutdown,
please wait for at least 30 seconds before restarting the product.
3. All operations such as removal or installation shall be
implemented with safety and electrostatic discharge (ESD)
measures. Wear an anti-static wrist strap during operation and
always touch the metal chassis of the IFP frame during removal
or installation in the OPS slot.
4. Ensure you are working withing the proper environmental
conditions of working temperature 0°~40°, and working
humidity 10%~90% RH.
5. Assure proper cooling and ventilation.
6. Keep water away from the electronics.
7. Please call professional personnel for maintenance service.
8. Replace only with the same or equivalent battery type.
9. Disposal of a battery into too much heat, or mechanically
crushing or cutting of a battery, that can result in an explosion.
10. Keep away from high or low extreme temperatures and low air
pressure at high altitude during use, storage or transportation.