Battery Replacement - Rexer Rx4232 Benutzerhandbuch

User Manual
WARNING
- Read this manual carefully and keep it for future reference
- Although the battery has been charged by the manufacturer, the level may have decreased. Charging for a
full day is encouraged to optimize performance. Charge at least every three months to maintain optimal
battery life
- This product operates on 230V~ / 50Hz current
- Clean only with a dry cloth. Do not expose the unit to direct exposure of rain or splashes of water or other
liquids
- Keep the fixture out of the reach of children
- Do not stare at LEDs as direct and prolonged exposure may cause damage to eyesight
- Contact only qualified service centers for maintenance and/or repairs
RECHARGE
Insert the plug of the power cord (included) to the relevant socket on the side of the lamp and the plug into
a 230V~ power outlet. The LED indicator will light up during charging
Insert a 12.0V car cigarette lighter adapter cable (not included) to the relevant socket on the side of the
lamp. The LED indicator will light up during charging
MODE OF USE
Position the knob all the way anti-clockwise until you hear a "click," in which case the lamp is off and ready
for charging. When the power is on, the red LED will light up indicating that the internal battery is being
recharged, when the LED changes to green, it means the internal battery is charged. Disconnect the power
cord
Turning the knob clockwise will hear a "click" and the lamp will turn on at its lowest level of intensity. By
continuing to turn the knob clockwise, the lamp will increase its brightness until it reaches its maximum
level. To turn the lamp off, turn the knob counterclockwise until you hear a "click"
Using the brightness level selector, you can switch between turning on the 32 LEDs or turning on the 80-LED
tube
Light modes: High intensity (1 hour autonomy) / Low intensity (15 hours autonomy)
N.B. - For the Anti Black-out function, the lamp must be connected to a 230V~ power outlet and turn the
knob clockwise (selecting the desired intensity level). The lamp will remain off and, only in the event of a
blackout, will turn on automatically (until power is restored)

BATTERY REPLACEMENT

Contact qualified technicians or Service Centers