VEVOR FRB-1E5 Bedienungsanleitung Seite 10

Operation
1.Precautions
a.Check all the circuitry and the plug meet all requirements.
b.Set the temperature and time to a comfortable level.
c.Drink a cup of water before the sauna session.
d.After 2 hours of continuous use,shut the sauna down for one hour.
e.To avoid burns,do not touch the heating element.
f.WARNING:Covering the heater or infrared emitter causes fire risk!
2.Operation
a.Plug the sauna into a outlet which is stated in nameplate.Do not share the outlet with any
otherappliances.
Sauna should be unplugged when not in use.
b.After your sauna session,turn off,and unplug the power cable.
c.DO NOT OPERATE THE SAUNA UNSUPERVISEDTO REDUCE THE RISK OF FIRE.
Note:
When the environmental temperature is low, the heating time will take longer.
It is also possible the sauna temperature display is not able to reach its maximum temperature.
This is normal and does not in any way affect the performance of the infrared heaters or their health
benefits. the sauna temperature sensor only measures the heat radiated by the heating elements.
It does not measure the infrared heaters penetrating heat and this is where most of the health
benefits are.
Control panel operation
- 9 -