Seite 1
CLEVO HIGH BAR Benutzerhandbuch User Manual...
Seite 2
Auch die Wahl des Ortes, wo du trainieren möchtest, erweitert sich auf allen Wänden und Decken oder auch an Türrahmen. Unser Ziel von CLEVO ist es, so viele Kunden wie möglich mit unseren hoch- wertigen Produkten dabei zu unterstützen, ein 100% flexibles Training zu er- möglichen.
Benutzerhandbuch Seite 3 Inhaltsverzeichnis S. 4 Geräteübersicht S. 6 Sicherheitshinweise und Entsorgung S. 9 Montage S. 12 Aufbewahrung und Pflege S. 13 Garantie und Rückgaberecht S. 15 Kontakt...
2 Sicherheitshinweise und Entsorgung Seite 6 Wichtige Sicherheitshinweise WICHTIG! Mache dich vor Inbetriebnahme des Gerätes mit allen in dieser gedruckten Anleitung erwähnten Sicherheits-, Montage-, Bedienungs- und Trainingshin- weisen vertraut. – Alle Sicherheitshinweise sind strikt zu befolgen, um Risiken von Verlet- zungen zu verhindern.
Seite 7
3. Die MAXIMALE BELASTBARKEIT deiner CLEVO-Module darf beim Klettern bzw. bei der Nutzung unter keinen Umständen überschritten werden! Montierst du CLEVO Add-Ons, wie die High Bar, an deinem CLEVO Modul, gilt folgende MAXIMALE BELASTBARKEIT: – 130 KG bei CLEVO DOOR Modul –...
Seite 8
Erhöhung dynamischer Kräfte beitragen, zusätzlich an das Gerät an- gebracht werden. 9. Bei der Verwendung mit dem CLEVO DOOR Modul: Das Gerät sollte vorsichtig und langsam im Türrahmen angebracht werden, um mögliche Kratzer an der Zarge zu vermeiden. Zudem sollte ein kleiner Belastungstest nach Anbringung im Stehen gemacht werden, um zu sehen ob das Gerät auch sauber am Türrahmen aufliegt.
Montageort besteht und ob dieser ausreichend tragfähig ist. Anleitung Schritt 1 Löse die vier Schrauben und Mut- tern von deinem CLEVO DOOR oder CLEVO WALL Modul, die an dem vor- deren Holzbrett montiert sind. Die Senkkopfschrauben M6x25 wer- den zusammen mit der High Bar nicht mehr benötigt.
Seite 10
3 Montage Seite 10 Anleitung Schritt 2 Die Aufnahmen links (6) und rechts (7) mit den Halbrundkopfschrauben M6x30 (1) und den silbernen M6 Mut- tern mit Sperrverzahnung ca. 15 Nm (handfest) verbinden. Beispiel Schritt 3 Die Holzstange (8) an die beiden Auf- nahmen links und rechts (6+7) mit den Halbrundkopfschrauben M6x50 (2), den Scheiben 6,4 (4) und den...
Seite 11
CLEVO DOOR Modul befestigen möchtest! Um die Stabilität deines CLEVO DOOR Moduls zu erhöhen, die Quer- strebe (9) an der CLEVO DOOR Aufnahme links und rechts mit den Halbrundkopfschrauben M6x16 (5), den Scheiben 6,4 (4) und der Mutter M6 schwarz (3) ca. 15 Nm (handfest) verbinden.
3 Montage Seite 12 Anleitung Montage Querstrebe - Ansicht Rückseite: 4 Aufbewahrung und Pflege Bewahre dein Gerät im Innenbereich auf. Vermeide, dass das Gerät bei der Aufbewahrung direkter Sonneneinstrahlung oder Feuchtigkeit ausgesetzt ist. Bewahre das Gerät nicht in der Nähe von Wärmequellen auf. Reinige das Gerät sowie die Holzgriffe mit einem feuchten, weichen und sau- beren Tuch.
5 Garantie und Rückgaberecht Seite 13 Die Garantiezeit beträgt zwei Jahre und beginnt mit dem Tag des Rechnungs- datums. Bitte bewahre die Rechnung als Nachweis für den Kauf und damit den Garantieanspruch auf. Es gelten folgende Garantiebestimmungen: Der Hersteller garantiert kostenfreie Behebung von Mängeln, die auf Material- oder Fabrikationsfehler zurückzuführen sind.
Seite 14
Funktion des Produktes und sind lediglich optischer Natur. Setze dich im Falle eines Garantiefalles umgehend mit unserem Serviceteam in Verbindung: info@clevo-climbing.com Um die Ware im Falle einer Reparatur oder Retoursendung ausreichend zu schützen, bitten wir dich, falls möglich, die Originalverpackung für die Dauer der Garantiezeit aufzubewahren.
5 Kontakt Seite 15 Fragen oder Kommentare? Clevo Climbing Evolution FT Fitness Technology GmbH Im Oberhof 4 88260 Argenbuehl, Germany www.clevo-climbing.com +49 89 215300-747 info@clevo-climbing.com facebook.com/clevoclimbing youtube.com/@clevoclimbing instagram.com/clevoclimbing/ Solltest du weitergehende Fragen zum Produkt oder Schwierig- keiten bei der Montage des Produktes haben, kannst du uns sehr gerne kontaktieren.
Seite 16
Also, the choice of where you want to train expands to all walls and ceilings or even door frames. Our goal at CLEVO is to support as many customers as possible with our high quality products to enable a 100% flexible training.
Seite 17
User Manual Seite 17 Table of contents p. 18 Product overview p. 22 Safety instructions and disposal p. 23 Mounting p. 26 Storage and care p. 27 Guarantee and return policy p. 29 Contact...
1 Product Overview page 19 Scope of delivery screws quantity button head screw M6 x 30 black button head screw M6 x 50 black nut M6 black disc 6,4 black button head screw M6 x 16 black separate parts quantity adapter left black adapter right black wooden bar / beech 40 x 1000 mm...
2 Safety Instructions and Disposal page 20 Important safety instructions IMPORTANT! Before using the product, familiarise yourself with all the safety, mounting, ope- rating and training instructions mentioned in this printed manual. – All safety instructions must be strictly followed to prevent the risk of injury. –...
CLEVO add-ons, such as the High Bar, on your CLEVO module, the following MAXIMUM LOADING CAPACITY applies: – 130 KG (287 LBS) for CLEVO DOOR module – 100 KG (200 LBS) for CLEVO WALL module 4. The product may only be installed indoors or in a covered outdoor area.
Seite 22
9. When product will be used with the CLEVO DOOR module: The product should be placed carefully and slowly in the door frame to avoid possible scratches on the frame. In addition, a small load test should be carried out after the product has been installed in a standing position to see whether the product rests cleanly on the door frame.
Instruction Step 1 Loosen the four screws and nuts from your CLEVO DOOR or CLEVO WALL module that are mounted on the front wooden board. The M6x25 countersunk screws are no longer needed together with the high bar.
Seite 24
3 Mounting page 24 Instruction Step 2 Connect the adapter left (6) and right (7) with button head screw M6x30 (1) and the silver M6 nuts with flange and locking teeth approx. 15 Nm (hand- tight).. example Step 3 Connect the wooden bar (8) with the two adapters on the left and right side (6+7) using the M6x50 button head screws (2), the washers 6.4 (4) and...
Seite 25
25 Instruction Step 4 This step is only necessary if you want to attach the High Bar to your CLEVO DOOR module! To increase the stability of your CLEVO DOOR module, connect the cross strut (9) to the CLEVO DOOR adapters on the left and right using the M6x16 button head screws (5), the washers 6.4 (4) and the M6 black nut (3) approx.
Do not use abrasive, corrosive, acidic or alkaline cleaning agents, as these may damage the surface of the appliance or cause scratches. The wood of the CLEVO DOOR is natural. If necessary, the wood can be trea- ted with sandpaper to smooth its surface. In this case, only use sandpaper with...
5 Guarantee and Return Policy page 27 The guarantee period is two years and begins on the date of the invoice. Plea- se keep the invoice as proof of purchase and thus the warranty claim. The following guarantee conditions apply: The manufacturer guarantees free-of-charge repair of defects that are due to material or manufacturing faults.
Seite 28
In the event of a guarantee case, please contact our service team immediately: info@clevo-climbing.com In order to protect the product sufficiently in case of repair or return, we ask you to keep the original packaging for the duration of the warranty period, if possible.
6 Contact page 29 Questions or comments? Clevo Climbing Evolution FT Fitness Technology GmbH Im Oberhof 4 88260 Argenbuehl, Germany www.clevo-climbing.com +49 89 215300-747 info@clevo-climbing.com facebook.com/clevoclimbing youtube.com/@clevoclimbing instagram.com/clevoclimbing/ If you have any further questions about the product or difficulties with the installation of the product, please do not hesitate to contact us.