Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6) Service
a) Have your power tool serviced by a qualified technician
using only identical replacement parts. This ensures that
the power tool remains safe.
b) Never repair damaged batteries. Battery maintenance
must only be carried out by the manufacturer or authorised
technician.
7) Charging safety
-
Children aged from 8 years and above and people with
reduced physical, sensory or mental capabilities or lack
of experience and knowledge can use the charger if they
have been given supervision or instruction concerning
use of the power tool in a safe way and understand the
hazards involved.
-
Children must not play with the power tool or the power
cable.
-
Cleaning and maintenance tasks must not be carried out
by unsupervised children.
-
The power cable of this charger is not replaceable.
Discard the charger if the power cable is damaged.
8) Use and handling of the charger
-
Connect the charger only if the voltage of the socket
matches the information on the rating plate.
-
Connect the charger only to an easily accessible socket
so that you can quickly disconnect it from the mains in
the event of a malfunction.
-
Always allow sufficient ventilation when charging the
battery; gases may be released.
-
Do not charge non-rechargeable batteries.
-
Keep the charger away from humidity.
20
PerfectSurface 180 Delta
-
Never use the charger in environments where explosive
or flammable materials are present. There is a risk of
fire and explosion.
-
Do not place objects on top of the charger and do not
cover it.
-
Keep the charger away from heat sources.
-
Regularly check the charger for damage.
-
Repair damaged chargers properly before reusing them.
-
The charger must not be disassembled. Repairs should
only be carried out by an authorised technician.
-
Do not use the charger if it has been subjected to shocks
or falls.
-
Always unplug the charger from the power supply after
use.
-
Unplug the charger from the power supply before
cleaning, servicing, storing and transporting, and allow
it to cool completely.
9) General precautions
-
Hold the electric tool by the insulated gripping surfaces
when performing an operation in which the tool may
come into contact with exposed wiring. The tool must
not come into contact with live wires. This may result in
electric shock.
-
Keep the power tool and its accessories away from hot
surfaces.
-
Do not allow untrained people use the power tool and
its accessories.
-
People with physical or mental disabilities must not use
power tools or accessories without supervision.
-
Children must not play with, clean or try to repair the
power tool and its accessories.
21
PerfectSurface 180 Delta
Werbung
