Hama 00210920 Kurzanleitung

Installation Removal
1. Cleaning the smart watch 2. Remove the back of the case and 3. Attach the front of the case to 1. On the back of the case, lift the left-
display pull off the backing film inside the smart watch. Attach it at an hand top corner. This is marked with
angle and start on the side of "open". Pull off the back of the case.
the button.
4. Attach the back of the case 5. Pull off the backing film on the 2. To remove the front, lift the case on
and press it firmly into place outer display of the case the side without buttons and pull off in
the direction of the buttons.