Hyundai HIL191807 Benutzerhandbuch

HYUNDAI
Quality lighting
HIL191807 / HIL191808 / HIL191809 / HIL191810
INTRODUCTION
The Hyundai LED tri-proof lights with motion sensors are the perfect alternative
traditional lighting fixtures. The Hyundai tri-proof lights with motion sensors come
with LED strips that generate a bright wite light The lights are suitable for indoor
and outdoor purposes.
FEATURES
- Sensor: Microwave sensor SK602A
- Equiped with protection rubber and nylon cover protector
Wiring specification: rubber neopreen cable
(Warning: PVC wires are not recommended)
- Waterproof level: IP65
- Suitable for ceiling mount or suspend mounting
- Wattage per light: lx 9W, 9W, lx 18W,
Operating voltage: AC 220-240 Volts / 50 Hz
- Luminaire class: Class I luminaire
APPLICATION
The ight is suitable for indoor and outdoor purposes. With an IP level of IP65 the
lights are well protected against water and dust.
MICROWAVE SENSOR
Microwave presence detectors are more senstive to movement compared to basic
motion sensors. They are ideal for large spaces and areas with alot of comers and
special shapes. The microwave sensor covers a bigger space and has a higher
sensitivity.
SAFETY NOTICE
- Electrical work must always be done by a qualified person.
In case of lamp failure, disconnect the lamp from the main power supply.
attempt to repair the lamp by yourself.
Repair work must only be done by a technician/customer
INSTALLATION
FOR QUESTIONS OR SUPPORT PLEASE CONTACT US AT:
NL / EN support@alleenonline nl
BE / FR - support@alleenonline.be
ENVIRONMENTAL PROTECTION
Electrical products should not be disposed of with household
Check with your ocal authority or retailer for recycling advice
/ HIL191811 / HIL191812
18W, lx 22W or 2x 22W
Do
service person.
waste.
The cover from the LED Tri Proof lights can be opened with the screws on the side
to
the middle of the light the sensor and the 3 switches for adjusting are located. Opening
light and any operation must be done after disconnected
ADJUSTING THE SENSOR
- Sensitivity: Detection range: 1-8 meter
- Time: Timer function:
- LUX: Photosensitivity*
*By adjusting the sensor for photosensitivity
work durin ni ht time and / or daytime
SENS
TIME
CONNECT SUPPLY LEAD
The LED Tri Proof light can be connected
the light is OFF or functioning with the motion sensor. The second option is that the light
will be either ON or OFF
Proof light.
Blue (N)
Green/YeIlow (e)
not
Brown (L - option 1) or (L' - option 2)
Option 1: The light is OFF
The light us ON / the sensor is working
Option 2: The light is OFF
The light is constantly ON
Licensed to The Investment Company Europe B.V. All rights reserved.
Licensed by Hyundai Corporation,
Company Europe B.V. exclusively developed for sales in the Netherlands, Belgium,
The artwork and design of this package are protected by European copyright law
and may not be reproduced, distributed,
purpose without prior written permission. It is not permitted to alter, or reproduce
USER
Tri- proof light with motion sensor
form power supply!
10 sec-30 minutes
: 10-2000 LUX
the motion sensor of the Tri Proof light will
LUX
WITH TERMINAL
into two different ways. The first option is that
Please see below how to connect
0 2019 The Investment Company Europe B.V.
Hyundai is a trademark of Hyundai Corporation,
Korea. mported/Distributed
displayed, published or used for any
any trademarks or copyright notice from this package
MANUAL
In
the cables to the LED Tri
N OO
O ooo
L optionl O
L'-option 2 0
RoHSZ
Korea.
by The Investment
Luxembourg and France.
PATENT PENDING