Compass SYMBOL Bedienungsanleitung Seite 3

Universal heated seat cover.
ź
Powered by 12V car socket.
ź
Built in thermostat.
ź
Suitable for all types of seats.
ź
Even for seats with built-in airbag.
ź
Please read the enclosed instructions befo-
ź
re use.
Instructions for use:
Start the engine and connect the plug to the
ź
12V car cigarette lighter socket.
Turn on low or high power setting for heatin-
ź
g.
The plug is equipped with a glass fuse, you
ź
can replace it by unscrewing the front of the
connector.
Replace the fuse only with a new one, with
ź
the same parameters as the original one.
Maintenance:
This cushion must not be washed or chemical-
ly cleaned. Perform maintenance by wiping
with a damp cloth, or use non-aggressive foam
fabric cleaners.
The manufacturer accepts no liability for acci-
dents or damage resulting from non-
compliance with these instructions.
Text, design and technical specifications are
subject to change without notice and we reser-
ve the right to make changes.
Disposal and recycling
Do not dispose of power tools and devices in
the household waste!
According to the European Directive 2012/19 /
EC on Waste Electrical and Electronic
Equipment (WEEE) and in enforcement of
national law, used power tools must be collec-
ted separately and transported to an appropri-
ate environmentally friendly recycling facility.
e
Safety instructions
For the safety of the user, it is necessary to
carry out the installation in the correct way.
No part of the seatcover may cover the
ź
airbag outlet on the side of seat
(see car documentation).
ź
The cover must be placed on the seat so
ź
that the seating part is placed on the seat
and a support part is on the support side.
The metal hooks are designed to be atta-
ź
ched to the bottom of the seat and the
straps are designed for the backrest.
The cover must be fitted directly on the
ź
seat.
There cannot be other objects placed
ź
under the cover (eg. other covers, etc.).
Never cover the heating cover with other
ź
objects, such as pillows, other covers, etc.
Do not fold or bend the cover to prevent
ź
possible damage.
The product is intended only for vehicles
ź
with a 12V socket, it must not be used on
vehicles with 24V socket (not even in
series connection).
The connection may only be made using
ź
the supplied 12V plug.
Always check the cleanliness of the 12V
ź
lighter contacts and the cover plug before
use.
The plug is equipped with a glass fuse.
ź
The fuse can only be replaced with a new
ź
one with the same parameters.
The seat cover must not be used in a ben-
ź
ded or folded state.
Unplug before leaving the vehicle.
ź
Do not leave turned on cover in the car
ź
unattended (battery discharge, overhea-
ting).
Do not pierce the cover with pointed
ź
objects.
Protect the cover from wetness and mois-
ź
ture.
The seat cover must not be used if the
ź
cable insulation has been damaged, or if
you find other obvious damage.
Yoiu cannot repair or open the heating
ź
cover on your own.
Do not, under no circumstances, wash in
ź
the washing machine.
Improper use and / or repairs will void the
ź
manufacturer's warranty.
-3-