Compass TWIN Bedienungsanleitung Seite 3

Heated seat cover with built-in massage
motors, ideal companion for long journeys.
Significantly helps prevent back pain during
long rides. Thanks to the universal fastening
system, it is suitable for all common types of
seats. The control panel on the supply cable
allows you to turn on the heating of the seat
part and two different massage modes in the
backrest part. Please read this manual before
use.
Assembly instructions:
Spread the cover over the seat and fasten it
ź
with the straps on the back of the seat.
Fasten the lower part of the cover with hooks
ź
to the appropriate parts of the seat.
Make sure that no part of the cover covers
ź
the opening of the airbag in the seat back
(see vehicle documentation).
Do not fold or pierce the cover on the seat
ź
during assembly, there is a risk of damage to
the cover.
Instructions for use:
This cover is equipped with seat heating and a
2x massage motor in the backrest. Plug the
cover into the car's 12V socket and use the
remote control to select the desired functions.
Safety instructions
For the safety of the user, it is necessary to
ź
carry out the first assembly correctly, or fixing
the seat cover in the car. In case of incorrect
installation, it is not possible to ensure cor-
rect inflation of the airbags in the event of an
impact.
Shifted covers must be readjusted. If the
ź
cover is already very worn, it must be remo-
ved, or exchanged.
No part of the cover must cover the opening
ź
of the airbag in the seat back (see vehicle
documentation).
Do not leave the cover plugged in unatten-
ź
ded in the car (battery discharge, overheatin-
g).
Do not fold the cover on the seat, this will
ź
prevent possible damage.
Do not wash in the washing machine under
ź
any circumstances.
The connection may only be made using the
ź
supplied 12 V plug.
The plug is equipped with a glass fuse, you
ź
can replace it by unscrewing the front part of
the connector. Only replace the fuse with a
new one, with the same parameters as the
e
original one.
Before using via the cigarette lighter, the
ź
cleanliness of the contacts must be checked.
The seat cover must not be used in a collap-
ź
sed or folded state.
Pull the plug before leaving the vehicle.
ź
In case of incorrect use and / or repairs, the
ź
manufacturer's warranty expires.
The seat cover must not be used if the cable
ź
insulation has been damaged, or if other
obvious damages are found.
The seat cover must not be repaired or ope-
ź
ned by oneself.
Do not poke the cover with pointed objects.
ź
Protect the cover from wetness and humidi-
ź
ty.
Maintenance:
This seat cover must not be washed or dry
cleaned. Carry out maintenance by wiping with
a damp cloth, or use non-aggressive foam
fabric cleaners.
The manufacturer does not assume responsi-
bility for accidents or damages resulting from
non-observance of this manual.
Changes in text, design and technical specifi-
cations are subject to change without notice
and we reserve the right to change them.
Disposal and recycling
Do not dispose of electrical tools and devices
in household waste!
According to European Directive 2012/19/EC
on Waste Electrical and Electronic Equipment
(WEEE) and when enforcing national law,
used power tools must be collected separately
and transported to an appropriate ecological
recycling facility.
-3-