VTech RM9761 Schnellstartanleitung Seite 5

Overview
1
2
3
4
5
1 Light sensor
6
2 Camera lens
3 Microphone
4 Infrared LEDs
• Allow you to see clearly in a dark
environment.
5 Night light
Night Light Control Key
6
• Single Tap: Turn on/off.
• Tap and hold (with the light turned
on): adjust night light brightness.
7
7 Privacy Mode on/off switch
8
Power LED indicator / Privacy LED
8
indicator
• The LED initially turns on when power
is first applied, then turns off after a
short time. Once turned off, the LED
9
indicates the privacy mode status.
9 Speaker
Power jack
10
11 Temperature sensor
12 Slots for wall mounting
PAIR/RESET key
13
10
• To enter pairing mode, press and
hold the PAIR key for three sec-
11
onds until you hear a beep sound.
Then follow the app instructions to
connect the camera to a 2.4GHz Wi-Fi
network.
12
• To reset the camera, press and hold
the PAIR key until you hear a beep
sound. Release the PAIR key and then
press and release a further five times
13
until you hear another beep sound.
The camera will emit another beep
when the reset is complete. After the
beep sound, the camera will reboot
itself.
5