EN - English - Quick Guide:
This device needs to be upgraded to RouterOS v7.2.3 or the latest version to ensure compliance with local authority regulations!
It is the end users' responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling
requirements, and Dynamic Frequency Selection (DFS) requirements. All MikroTik radio devices must be professionally installed
This is a Network Device. You can find the product model name on the case label (ID).
Please visit the user manual page on
The most important technical specifications for this product can be found on the last page of this Quick Guide.
Technical specifications,
Full EU Declaration of Conformity,
Configuration manual for software in your language with additional information can be found
MikroTik devices are for professional use. If you do not have qualifications please seek a
First steps:
Make sure your ISP is accepting hardware changes and will automatically assign an IP address.
Connect your ISP cable to the first Ethernet port.
Connect your PC to the Ethernet2 port.
Set your computer IP configuration to automatic (DHCP).
Open
https://192.168.88.1
wireless passwords on the sticker).
To find the device if the IP is not available for example "CRS" models, download Winbox from our webpage and use it to connect through MAC address.
Update RouterOS software to the latest version, make sure that the device has an internet connection.
If the device does not have an internet connection update software by downloading the latest version from our webpage and uploading it to the Winbox, Files
menu, and rebooting the device.
Choose your country, apply country regulation settings and set up your password.
For "RBM11G, RBM33G" models install your desired modem into miniPCIe slot and then connect to the first Ethernet port with MAC Winbox.
Models 260GS can only be accessed using a web browser, operating system SwOS.
Safety Information:
Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing
accidents. The installer should be familiar with network structures, terms, and concepts.
Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product.
This equipment is to be installed by trained and qualified personnel, as per these installation instructions. The installer is responsible for making sure, that the
Installation of the equipment is compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the device.
This product is intended to be installed indoors. Keep this product away from water, fire, humidity, or hot environments.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your own
risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power adapter from the power outlet.
Manufacturer: Mikrotikls SIA, Brivibas gatve 214i Riga, Latvia, LV1039.
Note: For some models, check the user and wireless passwords on the sticker.
BG - Български. Бързо ръководство:
Това устройство трябва да бъде надстроено до RouterOS v7.2.3 или най-новата версия, за да се гарантира спазването на местните
регулаторни разпоредби.
Крайните потребители са отговорни за спазването на местните разпоредби, включително работата в рамките на законни честотни канали,
извеждане на продукция изисквания за захранване, окабеляване и изисквания за динамичен избор на честота (DFS). Всички радиоустройства
на MikroTik трябва да бъдат професионално инсталиран.
Това е мрежово устройство. Можете да намерите името на модела на продукта на етикета на регистъра (ID).
Моля, посетете страницата с ръководството за потребителя на
Или сканирайте QR кода с мобилния си телефон.
Най-важните технически спецификации за този продукт могат да бъдат намерени на последната страница на това Кратко ръководство.
Технически спецификации,
пълна ЕС декларация за съответствие,
/products
Ръководство за конфигуриране на софтуер на вашия език с допълнителна информация можете да намерите на
Устройствата MikroTik са за професионална употреба. Ако нямате квалификация, моля, потърсете
Първи стъпки:
https://mt.lv/um
for the full up-to-date user manual. Or scan the QR code with your mobile phone.
brochures, and more info about products at
in your web browser to start configuration, there is no password by default, user name: admin
at https://mt.lv/help
consultant https://mikrotik.com/consultants
https://mt.lv/um-bg
за пълното актуализирано ръководство за употреба.
брошури и повече информация за продуктите на
https://mikrotik.com/products
(or, for some models, check user and
https://mikrotik.com
https://mt.lv/help-bg
консултант https://mikrotik.com/consultants