Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB Installation and operating instructions
LED flood light
Art. No. 36673, 36674
Many thanks for deciding to buy our lights.
Our LED flood light is made out of sturdy, high value materials and will provide you with quality
lighting. The LED flood light consists of a stable aluminium housing and a connection cable. It can be
used both indoors and outdoors.
Please read through installation and operation instructions carefully and keep these in a safe
place.
We do not accept liability for damage to persons or property caused by non observation of the
instructions, improper handling or for unauthorized changes made to the product.
Package contents:
1 x LED flood light
Installation and operating instructions
Technical data:
Article
Connection
36673
100-240 V 50 Hz
36674
100-240 V 50 Hz
Before Installation:
The ground spike may only be used after it has been taken out of the packaging.
Take the parts carefully out of the packaging.
Make sure, before using the lighting system that this has not been damaged during
transportation. The lighting system must not be operated if there is damage to cable or the
electrical parts are damaged. Each faulty fuse has to be replaced. Repairs may only be done
by a specialist electrician.
Keep packaging materials well away from children and pets. Danger of suffocation!
Safety and warning notes:
Do not look directly into the LED - especially for longer periods of time - without protecting
your eyes. A LED beam should not be directed into other people's eyes.
Operation is strictly forbidden if there is damage to the lights, plugs or the supply line.
Never make your own repairs to faulty parts. Repairs must be done by trained specialists.
Do not leave children unattended in the area of the lights or other electrical appliances.
Never expose the lights to a direct jet of water (garden hose, for example) and never immerse
the lights into water or other liquids!
Do not expose the lights to extreme heat or exposed flames.
The entire product must neither be changed nor converted. Changes made to the lighting set
lead to invalidation of the guarantee (warranty).
Care and servicing:
You must make sure that the power supply is disconnected before cleaning.
Use a dry, or slightly damp cloth for cleaning.
Never use chemicals or abrasives for cleaning.
Disposal:
Old electronic equipment must be brought to public connection points and must not be
disposed of as household waste.
Installation instructions Art. No. 36673, 36674
Illuminant
20W LED illuminant, 6000K,
cannot be changed
30W LED illuminant, 6000K,
cannot be changed
Page 1 of 2
Protection
Protection
type
Class
IP 65
I
IP 65
I
®
Heitronic
H. Vollmer GmbH
Allmendring 29
D-75203 Königsbach-Stein
Status 01.2012
Werbung
