Herunterladen Diese Seite drucken

elv 39001 Installationsanleitung Seite 2

Beleuchteter tannenbaum set

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

GB Installation instructions
Lighted fir tree Set
Art. No.: 39001, 39002
Many thanks for deciding to buy our lighted fir tree.
Our fir tree are made out of sturdy, high value materials and will provide you with attractive lighting. The fir tree
can be used for decorative purposes, both indoors and outdoors.
Please read through these installation instructions carefully and keep these in a safe place.
We do not accept liability for damage to persons or property caused by non observation of the instructions or by
improper handling.
Package contents:
1 Fir trees with transformer
Installation instructions
Technical data:
Article
Connection
39001
230-240 V 50 Hz
2-er Set
39002
230-240 V 50 Hz
3-er Set
Safety and warning notes:
The set may only be used after it has been taken out of the packaging.
Remove the fir trees carefully from the packaging.
Keep packaging materials well away from children and pets. Danger of suffocation!
The fir trees must no longer be operated if there is damage to the transformer, cable or the electrical
parts. Repairs may only be done by a specialist electrician.
This is not a toy! Do not leave children unattended in the area of the lights or other electrical appliances.
Do not connect the rope light to other electrical appliances. The rope light must not be connected
electrically to another rope light.
Disconnect the fir trees from the power supply if you are not going to use it for a longer period of time or
it is left unattended over a longer period of time.
Do not bring the fir trees light into contact with extreme heat or exposed flames.
All lamp holders must be fitted with a lamp
The entire product may neither be changed nor converted. Changes made to the lights lead to
annulment of the guarantee (warranty).
Assembly:
Decide on the location where installation has to take place.
The fir trees must be switched free from voltage before installation and protected against being
switch on again. Take the appropriate automatic circuit breakers out of the junction box in the
building or disconnect the garland from the power supply.
Make sure that the base is solid enough to guarantee firm, proper fixing of the lighting curtain.
Observe the respective processing regulations.
Do not cover the fir trees with decorative material or foil.
Do not bend the cable, make sure that the cable and plug are free from strain and rotational forces.
Protect the fir trees curtain from possible damage.
Handle the fir trees only in a power-free condition.
The garland must not be shortened.
The type name plate must not be removed.
Care and servicing:
The fir trees must be disconnected from the voltage supply before cleaning.
Use a dry, or slightly damp cloth for cleaning.
Never use chemicals or abrasives for cleaning.
Disposal:
Used electronic equipment must be brought to public connection points and must not be disposed of as
household waste.
Installation instructions Art. No. 39001,39002
Transformer
Output
2x 12 Lampen x 0,6 W
24V max. 7,2 VA
max. 14,4 W
3x 12 Lampen x 0,6 W
24V max. 7,2VA
max. 21,6W
Page 1 of 1
Protection
Protection
degree
Class
IP 44
II
IP 44
II
®
Heitronic
H. Vollmer GmbH
Allmendring 29
D-75203 Königsbach-Stein
Status 06.2010

Werbung

loading

Diese Anleitung auch für:

39002