Puffco PEAK Bedienungsanleitung Seite 8

Cleaning
3D Chamber
Glass
06
Remove the Joystick with Jacket &
Tether, then unscrew the 3D Chamber
from base.
Use a cotton swab to gently remove any
residue with 90%+ isopropyl alcohol.
Submerge the chamber in 90%+
isopropyl alcohol for 20 minutes.
Air-dry completely before reattaching.
DO NOT rinse.
Allow chamber to cool completely
before handling.
Isopropyl alcohol is highly flammable;
allow chamber to air-dry completely
before reattaching.
Carefully remove glass from base.
Once removed, submerge glass in
90%+ isopropyl alcohol for 20 minutes.
After soaking, thoroughly rinse glass
with water and let air-dry completely
before reattaching to base.
X Avoid allowing water into lower section.