HOMCOM FLO700 Bedienungsanleitung Seite 11

TIPS:
In the picture is a list of all the accessories for the sewage pump. If
there are accessories in the following installation examples that are not listed,
please purchase yourself, thank you.
1, Install the rubber sleeve (D) onto the sewage pump and lock it with a 90-110mm
hose clamp (G)
2, The customer can select the accessory A-B and check that the hose clamp of the
accessory is locked before installation. Then the customer choose the size of the
drain pipe, which is available in 1''(28mm) or 1-1/4''(32mm) sizes. The dimensions
are marked on the accessories and the customer is free to choose. In this
installation example we choose the 1-1/4''(32mm) drain pipe size. Then use a knife
to cut the extra.
PLEASE REMEMBER: The smaller the pipe diameter, the higher the lift.